To subscribe please click on the
picture and fill out the form
The Driven Man is a
proud
Distributor of Brembo Braking Systems
Brembo Caliper Clearance Guide
Wheel Measurement
General Note:
Dimensions listed are of brake system, Brembo recommends a minimum
of 3mm clearance between the caliper and the wheel spoke or rim.
Example:
1B1.8006A for the Chevrolet C5 Corvette
A) 46
B) 122
C) 200 Note: Requires minor modification to the OEM steering
knuckle
With a straight edge measure from the middle of the wheel
center bore out to 122 mm for the location of the bottom of
the caliper.
Now measure down from the straight edge to the back of the
wheel spoke for the system's "A"
measurement. This system needs 49 mm or more to leave
sufficient caliper clearance.
Repeat these (2) steps for the caliper clearance through to
the top of the caliper.
